Boost gauge fitting kit for VAG 1.8 and 2.0 TSI engines with the EA888 Gen.3 engine. The adapter is installed between the boost pressure sensor (MAP) and the intake manifold.
Installation takes approximately 5 minutes. The kit enables the creation of a vacuum connection or boost pressure connection for installing a boost gauge or dump valve.
The design allows the original engine cover to be refitted after installation, and the system can be completely removed without permanent modifications.
Suitable for: Audi A4 IV (B9), Audi S1 I (8X), Audi S3 III (8V) / IV (8Y), Audi SQ2 I (GA), Audi TT III (FV), Audi Tts II (8S), Cupra Ateca I (KH7), SEAT Leon III (5F), SEAT Tarraco I (KN2), Škoda Octavia III (5E3) / III (5E5/5E6) / IV (NX3), Škoda Superb III (3V3), VW Arteon I (3H) and 2 more (see the table below).
Compatible vehicles (manufacturer data)
| Vehicle | Chassis | Years | Engine |
|---|---|---|---|
| Audi A4 | A4 | 2016–2021 | 2.0 TFSI |
| Audi A5 | A5 | 2012–2026 | 2.0 TSI s |
| Audi Q5 | Q5 | 2013–2026 | 2.0 TSI s |
| Audi S1 | 8X | 2014–2018 | — |
| Audi S3 | 8V | 2013–2020 | — |
| Audi S3 | 8Y | 2020–2026 | 8Y Onwards), 8Y Sportback Onwards) |
| Audi SQ2 | SQ2 | 2018–2021 | 2.0TSI |
| Audi TT | MK3 | 2015–2026 | —, 2.0 TSI s (8S), 45 TFSI Onwards) (8S) |
| Cupra Ateca | — | 2018–2026 | 2.0 TSI |
| Seat Leon | MK3 | 2012–2020 | —, 1.5 TSI 130/150 BHP, 1.8 TSI, 2.0 TDI |
| Seat Tarraco | — | 2021–2023 | 2.0 TSI |
| Skoda Octavia | MK3 | 2012–2019 | VRS 2.0 TSI |
| Skoda Octavia | MK4 | 2020–2026 | — |
| Skoda Superb | B8 | 2015–2024 | 2.0TSI 280 BHP |
| Volkswagen Arteon | — | 2017–2026 | 2.0 TSI, R |
| Volkswagen Jetta | MK7 | 2018–2021 | — |
| Volkswagen Jetta | MK7.5 | 2021–2026 | — |
| Volkswagen Scirocco | — | 2015–2026 | 2.0 TSI s |
| Volkswagen T-Roc | — | 2019–2022 | R |
Before ordering, check that the product matches your vehicle (model, year and engine). If in doubt, write to us — we will check for you.
Reviews
There are no reviews yet.