CSR rear diffuser for VW Polo 5 Type 6R Hatchback

CSR-Automotive Diffuser | Rear bumper for VW Polo 5 Type 6R

• Rear bumper compatible with VW Polo 5 Type 6R model year 2009 – 5/2014
• for model-/body variant(s) hatchback
• not suitable for GTI, R-Line and Bluemotion 12/2009-03/2014 3-cylinder diesel with 75 HP
• with cutouts for two 90mm tailpipes in the middle (twin-pipe look)
• The cutouts for the exhaust must be cut into the bumper, exhaust cutout has a diameter of 120mm each.
  You have two options:
  • You install a sport exhaust CSR-ESD003 and the corresponding end pipes CSR-ZB116 as twin tailpipes (2 x 90 mm)
  • OR you install to your original muffler the end pipes CSR-ZB122 as twin tailpipes (2 x 90 mm). These will be welded directly to the existing exhaust.
• With expert assessment and thus exempt from registration
• Incl. mounting hardware, if necessary
• Includes mounting instructions
• The rear bumper is made from the innovative and high-quality material Fiberflex. The advantages of this novel compositae material: extremely high flexibility while simultaneously high stability, impact resistance, and non-flammability. A very high manufacturing quality and the low weight even allow use in professional motorsport. The characteristic black surface is endowed with good workability and guarantees professional results. Fiberflex products from CSR-Automotive are particularly well suited for repair and other modifications thanks to excellent cutting and bonding properties.
• Even surface texture enables painting with little pre-work (product is unpainted)
• Material is flexible
• The items included in this offer are only the mounting parts highlighted in the image “Delivery contents”.

Suitable for: VW Polo V (6R).

Manufacturer’s vehicle data

• VW Polo 5 Type 6R Hatchback — 2009–05/2014
• VW | Polo 5 Typ 6R | Schrägheck | 2009-5/2014 | nicht für GTI, R-Line und Bluemotion 12/2009-03/2014 3-Zylinder Diesel mit 75 PS, mit Ausschnitten für zwei 90er Endrohre in der Mitte (R32 Look), ESD003 + ZB116 oder ZB122 benötigt. Die Ausschnitte für den Auspuff müssen am Stoßfänger ausgeschnitten werden, Auspuffausschnitt hat einen Durchmesser von je 120mm.

Original data from CSR-Automotive. Please check model, year and version of your vehicle before ordering; if in doubt, contact us and we will check for you.

Approval

This part has no ABE, TTG or Teilegutachten. The manufacturer supplies a German expert opinion (Gutachterliche Stellungnahme).