MOVIT upgraded brake configurator – RS3 8Y / Formentor VZ5 / RSQ3 F3
Maximum braking performance for the most powerful MQB performance models. High-performance brakes are essential, particularly for vehicles such as the Audi RS3 8Y, Cupra Formentor VZ5 and Audi RSQ3 F3. MOVIT upgraded brakes have been developed specifically for high vehicle weights, extreme engine output and sustained high thermal loads.
Using a 382 x 36 mm high-performance brake disc, a two-piece construction and an advanced ventilation system significantly improves braking performance while substantially reducing wear and temperature peaks.
Technical highlights of the MOVIT brake discs
- Two-piece brake discs with aluminium bell
- Brake disc size: 382 x 36 mm
- High heat capacity through increased diameter and thickness
- Flow-optimised cross-drilled holes (subsequently drilled and countersunk)
- DDE ventilation system (Double Directional Evolvent) – up to 80% greater cooling surface
- Very high resistance to brake fade
- Long service life of wear components
Vehicle compatibility
Suitable for the following vehicles:
- Audi RS3 8Y
- Cupra Formentor VZ5 (only with Akebono brake calliper)
- Audi RSQ3 F3
Note: All upgrade kits require wheels of at least 19 inches.
MOVIT bundle matrix – front axle (382 x 36 mm)
- Brake disc size: 382 x 36 mm for Bundles 1, 2 and 3
- Construction: two-piece, drilled for Bundles 1, 2 and 3
- Aluminium brake bells: included with Bundles 1, 2 and 3
- Calliper relocation adapters: included with Bundles 1, 2 and 3
- Fastening hardware: included with Bundles 1, 2 and 3
- Brake pads: not included in the basic bundle; included with the Street and Performance bundles
- Pad type selection: Comfort/Sport with the Street bundle; Comfort, Sport or Endurance with the Performance bundle
- Stainless steel braided brake lines: not included with Bundles 1 and 2; included with Bundle 3
- Parts approval report: included with Bundles 1, 2 and 3
- Minimum wheel size: ≥ 19 inches for Bundles 1, 2 and 3
- Intended use: road use with Bundle 1, sporty road use with Bundle 2, and road and performance use with Bundle 3
Brake pad options
- Comfort: very good cold braking performance, quiet operation and low dust; ideal for everyday and road use
- Sport: higher friction coefficient, stronger initial bite and ideal for dynamic driving
- Endurance: high thermal resistance and very consistent response, designed for sustained heavy loads
Scope of delivery, depending on bundle
- 2x MOVIT brake discs (left/right), including aluminium bell
- Calliper relocation adapters
- Fastening hardware
- Brake pads according to the selected bundle
- Stainless steel braided brake lines (Bundle 3 only)
- Fitting instructions and bedding-in guidance
- Parts approval report
Important fitting information
- New brake pads are always recommended when fitting new brake discs.
- Used pads are not recommended with new discs.
Road use: The kits are intended for road use and include a parts approval report. The selected version must match the vehicle, chosen brake pads and intended use.
Note: The configurator is listed for the Audi RS3 8Y, Cupra Formentor VZ5 and Audi RSQ3 F3. The Cupra Formentor VZ5 requires Akebono brake callipers.
Suitable for: Audi RS3 IV (8Y), Audi RSQ3 II (F3), Cupra Ateca I (KH7), Cupra Formentor I (KM7).
Manufacturer’s vehicle data
- MOVIT Bremsen Upgrade-Kit Konfigurator 382 x 36 mm Audi RS3 8Y / Cupra Formentor VZ5 / Audi RSQ3 F3
Original product name by HG Motorsport (»z.B.« = e.g.). Please check model, year and engine of your vehicle before ordering; if in doubt, contact us and we will check for you.
Approval
This part comes with a German Teilegutachten (parts certificate); the document is included. In Germany the part must be entered in the vehicle registration after fitting.
Reviews
There are no reviews yet.