MTS Technik coilovers for BMW 7 (E65)
MTS Technik coilover suspension with Eibach springs made to MTS specification. Ride height is set on the threads — even at the highest setting the car sits lower than on the standard suspension. Twin-tube gas-oil dampers, polyurethane bump stops, 2-year warranty with no mileage limit.
Street — the default configuration recommended by MTS: a balance between comfort and stiffness and a wide lowering range. For everyday driving with a sportier feel.
Gold or INOX?
- Gold — threaded damper housings made of steel with a double gold zinc coating, anodised aluminium adjusters. The more affordable choice.
- INOX — threaded damper housings made of stainless steel: better corrosion protection, recommended for year-round driving and salted roads.
Springs, lowering and TÜV are the same for Gold and INOX — only the housing material differs.
Lowering: front 40 – 75 mm / rear 30 – 80 mm
TÜV certificate: Yes
Suitable for vehicles:
| Vehicle | Engine | Power | Years | Axle load (front / rear) |
|---|---|---|---|---|
| BMW 7 (E65) | 730 d | 150 kW (204 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 d | 155 kW (211 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 d | 160 kW (218 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 i, Li | 170 kW (231 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 i, Li | 184 kW (250 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 i, Li | 190 kW (258 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 735 i | 225 kW (306 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 735 i, Li | 200 kW (272 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 740 d | 190 kW (258 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 740 i, Li | 225 kW (306 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 745 d | 220 kW (300 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 745 d | 242 kW (329 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 745 i, Li | 245 kW (333 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 750 i, Li | 270 kW (367 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 760 i | 320 kW (435 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 760 i, Li | 327 kW (445 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
| BMW 7 (E65) | 730 Ld | 170 kW (231 HP) | 07/01 – 12/09 | 1295 / 1410 kg |
- Vehicles equipped with NIVO will need additional OE parts. REAR AXLE: 2x top mount (BMW part no: 33526779611), 2x spring shim upper (BMW part no: 33536753765), 2x supporting cup (BMW part no: 33526758283), 2x upper plate (BMW part no: 33526779415).
- Only for vehicles without EDC.
- Only for vehicles without electronic damping.
- Front and rear axle height adjustable (threaded shock absorber housing).
- If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
- During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
- Including M-Technik.
- Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
- Installation is also possible on vehicles equipped with NIVO / factory pneumatic suspension. In this case the assembly is possible only after the disassembly of the factory pneumatic system. In some cases, it may be necessary to use additional OEM Audi parts.
Availability: made to order, delivery time 5-7 working days. Warranty: 2 years.

Reviews
There are no reviews yet.