Rieger front bumper made from paintable ABS plastic for BMW 1 Series vehicles (E81/E82/E87/E88) with a headlamp washing system. It fits the E82 and E88 (182 / 1C), coupe and convertible, from 10.07 onwards, as well as the E87 (187 / 1K2/1K4), 4-door saloon, and E81 (187/1K2/1K4), 2-door saloon, from 09.04 to 08.11. This product is for the high-level version of the headlamp washing system.
Aluminium mesh and mounting equipment are included. For all versions, the set with air ducts and left/right wheel-arch liners (part no. 00303519) is required, except for the BMW 135i with an M-Package front bumper, where these air ducts and wheel-arch liners are already fitted.
Note: The original fog lights are no longer used. On BMW E81/E87 models before the facelift, the original BMW grilles from the facelift model are required for the Rieger front bumper. The set with air ducts and wheel-arch liners, part no. 00303519, is required to fit front bumpers 35030/31/32/33/41/43, except on the BMW 135i with an M-Package front bumper.
Suitable for: BMW 1 I (E81/E82/E87/E88).
Manufacturer’s vehicle data
- 1-series E82, E88 (182 / 1C): 10.07- – coupe, convertible
- 1-series E87 (187 / 1K2/1K4): 09.04-08.11 – sedan, 4-dr.
- 1-series E81 (187/1K2/1K4): 09.04-08.11 – sedan, 2-dr.
Original data from Rieger Tuning. Please check model, year and version of your vehicle before ordering; if in doubt, contact us and we will check for you.
Versions
- standard version
- for vehicles with parking sensors (PDC)
Installation also requires an additional part (not included): Rieger no. 00305889.
Approval
This part comes with a German ABE (Allgemeine Betriebserlaubnis — general operating permit); the document is included.
Manufacturer part no. (Rieger): 35041, 35043
Reviews
There are no reviews yet.