The electronic brake fluid tester gives an indicative reading of the water content in DOT 3, DOT 4 and DOT 5.1 fluids. The measurement helps you check the condition of the fluid and judge whether it needs further inspection or replacement.
The result is shown on a five-step LED scale. Green means a water content below 1 %, yellow signals a rising level, and red indicates about 3 % or more and the need to check and replace the fluid according to the vehicle manufacturer’s recommendations.
The metal sensors are protected by a removable cap. The tester is operated with a single button, and a side clip makes it easy to keep in a pocket or glovebox.
- Fluids: DOT 3, DOT 4 and DOT 5.1
- Result display: five-step scale of coloured LEDs
- Reading range: from below 1 % to above 3 % water
- Power: 1 AAA battery (not included)
Reading the result:
- green LED: below 1 % water, fluid in good condition
- green and 1 yellow LED: 1–2 % water, regular checking recommended
- green and 2 yellow LEDs: 2–3 % water, fluid approaching the replacement limit
- 1 red LED: about 3 % water, fluid replacement recommended
- 2 red LEDs: above 3 % water, the fluid should be replaced
How to use: remove the cap, switch the device on and dip the metal tip into the fluid. After taking the reading, clean and dry the sensors and put the cap back on. The product is not intended for silicone DOT 5 fluids. The pack contains the tester and the user manual.
Manufacturer information: Einparts Automotive. Supplier: EINPARTS EUROPE Sp. z o.o., Wierzbowa 1, 62-100 Wągrowiec, Poland, kontakt@einparts.eu.
Reviews
There are no reviews yet.