The glue-pull PDR dent removal tool kit allows you to repair small and medium bodywork deformations without access to the inside of the panel. You can use it on hail dents, minor parking damage, door dings and small collisions.
The repair works by gluing the chosen adapter to a cleaned surface and gradually pulling the metal out. Three tools are provided: a hand puller, a bridge puller and a slide hammer that can be converted into a puller with a T-type handle.
- 52 pieces: tools for pulling, levelling and removing glue
- 3 pulling methods: hand puller, bridge puller and slide hammer
- 30 adapters: different shapes and sizes make it easier to choose the pulling point
- Repair from the outside: the method needs no access to the inside of the panel
In the kit:
- 1 × slide hammer with T-type handle, 2-in-1
- 1 × hand puller
- 1 × bridge puller
- 1 × rubber hammer
- 1 × glue gun with a European plug
- 10 × yellow glue stick
- 30 × blue glue adapter (3 sets of 10)
- 5 × tap-down tool for levelling the surface
- 1 × rubber scraper for removing glue
- 1 × carry bag
How to use: wash, dry and degrease the bodywork surface and the adapter thoroughly. Choose an adapter to suit the size and position of the dent, apply glue and stick it on. Pull the dent out gradually with the chosen tool, level the surface if needed with the rubber hammer and a suitable tap-down tool, and remove the glue with the rubber scraper, without sharp metal tools.
Limits of the method: the kit is intended for small and medium dents. Success depends on the size, depth and position of the dent and on the condition of the paint. Do not use the tools on cracked, flaking or weakened paint.
Manufacturer information: Einparts Automotive. Supplier: EINPARTS EUROPE Sp. z o.o., Wierzbowa 1, 62-100 Wągrowiec, Poland, kontakt@einparts.eu.
Reviews
There are no reviews yet.